Family-run since 1991 · PA Lic. #187000 · NJ Lic. #13VH13150900

Mon–Fri 7am–7pm · ● 24/7 emergency roof line (888) 990-7177

Flat & low-slope roofs · PA & NJ

Flat Roof Repair & Replacement in PA & NJ

TPO, EPDM and modified bitumen roofs on Philadelphia row homes, additions, porches and commercial buildings. Our own crews find the leak, fix it and back the work: 5 years on repairs, 10 years on new roofs.

Get a free flat roof estimate

Tell us about the roof. We reply within 4 business hours. Leaking now? Call (888) 990-7177.

PA Lic. #187000 · NJ Lic. #13VH13150900

  • TPO · EPDM · Mod-bitFlat roof systems we repair and install
  • 20–30 yrsTypical life of a TPO or EPDM membrane
  • 5-yearWorkmanship guarantee on repairs
  • 10-yearWorkmanship guarantee on new roofs
Common problems

Flat roof problems we fix

Flat roofs do not shed water the way a pitched roof does. They depend on intact seams, sound flashing and clear drains, so small failures turn into leaks quickly.

Split seams

Seams that open with age, movement or poor original welding let water straight under the membrane.

Blisters and bubbles

Trapped moisture or air lifts the membrane; once a blister cracks, water gets into the insulation.

Ponding water

Water that sits for days after rain wears the membrane and finds every weak spot.

Clogged drains and scuppers

A blocked drain during a downpour can pond water past what the roof was built to carry.

Failed flashing

Parapets, skylights, chimneys and HVAC curbs are where most flat roof leaks start.

Party-wall leaks

On row homes, water can cross a party wall and show up next door before it shows up on your side.

Systems

Flat roof systems we work with

We repair all three systems and recommend a replacement based on the building, the exposure and what is already on the roof.

SystemBest forWhat to know
TPORow homes and commercial roofs, especially where cooling costs matterWhite, heat-reflective single-ply membrane with heat-welded seams; 20–30 year life
EPDMAdditions, porches and smaller roofsBlack synthetic rubber; lower cost per sq ft and handles freeze-thaw well; 20–30 year life
Modified bitumenOlder city row homes and commercial buildings that already have itAsphalt-based, multi-layer system; we repair it in kind or upgrade to TPO
Repair or replace

Repair the leak or replace the roof?

Most flat roof leaks come from one failure: a seam, a blister or a piece of flashing. Those we repair. When the problems are spread across the roof, a repair only buys time, and we will tell you so in writing.

Signs it is time to replace

  • Ponding across large areas of the roof
  • Wet insulation under the membrane
  • Repeated leaks in different spots
  • Many old patches and repairs
  • Membrane at the end of its 20–30 year life
  • Soft or damaged decking
Cost

Flat roof repair and replacement cost

Typical ranges in our service area. You get a written scope and a fixed price after the inspection.

ServiceTypical price*
Localized membrane repair (seam, blister, patch)$600–$2,500
Emergency tarping, up to 500 sq ft$400–$900
Flat roof replacement on a home (TPO or EPDM)$7,000–$14,000
Commercial flat roof replacement$5–$14 per sq ft

*Final price depends on roof size, access, the number of layers to remove and the condition of the decking and drains.

Row homes

Flat roofs on Philadelphia row homes

Row home roofs share parapets and party walls with the houses next door, so a leak rarely stays on one roof. We trace the water path before we scope the repair and coordinate with neighbors when the problem crosses the property line.

Emergency tarping and minor membrane patches on a one- or two-family row home usually do not need a permit in Philadelphia. A full roof replacement does, and we file it with L&I as part of the job.

  1. Check the drains firstClear drains and scuppers before and after storm season.
  2. Watch the parapetsCracked parapet caps and flashing are a common source of leaks.
  3. Tell the neighborsIf water appears next door, the source may be on your roof, or theirs.
  4. Do not walk a wet roofOlder row homes can hide soft decking and weak joists.
Process

How a flat roof job runs

  1. 1

    Inspection

    Leak traced, roof and drains checked.

  2. 2

    Written scope

    Fixed price, repair or replace.

  3. 3

    The work

    Repair or new membrane, flashing, drains.

  4. 4

    Walk-through

    Cleanup and warranty papers.

Flat roof leaking right now?

Our 24/7 emergency line puts a crew on site within 90 minutes.

Customer messages

What homeowners send us after the job

Real messages from customers after their roofing project. Tap a message to read it full size.

FAQ

Flat roof questions

Yes. We repair TPO, EPDM and modified bitumen roofs on row homes, additions, porches and commercial buildings: seams, blisters, patches, flashing and drains.

Both are single-ply membranes that last 20–30 years. TPO is white and heat-reflective with heat-welded seams, a good fit where summer cooling costs matter. EPDM is black rubber that costs less per square foot and handles freeze-thaw cycles well.

A localized membrane repair typically runs $600–$2,500. Replacing a flat roof on a home with TPO or EPDM typically runs $7,000–$14,000, depending on size, access and the number of layers to remove.

If the failure is in one place, we repair it. Ponding across large areas, wet insulation, repeated leaks in different spots or a membrane at the end of its life usually mean replacement. We put the recommendation in writing.

Repairs carry our 5-year workmanship guarantee and new roofs our 10-year workmanship guarantee, plus the manufacturer warranty on the membrane and materials we install.

Emergency tarping and minor membrane patches on a one- or two-family row home usually do not. A full replacement does, and we file it with L&I as part of the job.

Contact

Get a free estimate

Tell us about the project. A project manager calls you back within 4 business hours.